Ranger 2WD V6-245 4.0L VIN X SFI (1997)
Power Mirror Motor: Testing and Inspection
1. Key OFF.
2. Disconnect the LH or RH power outside rear view mirror motor connector.
3. Apply 12 volts to the 1 terminal and ground to the terminals and verify mirror operates in the specified direction.
4. Apply ground to the 1 terminal and 12 volts to the terminals and verify power outside rear view mirror operates in the specified direction.
5. If the power outside rear view mirror does not operate as specified, replace the power outside rear view mirror in question. Otherwise, return to the
Pinpoint Tests.
