Ranger 2WD V6-245 4.0L VIN X SFI (1997)
Seat Cushion: All Technical Service Bulletins
Bench Seat Back - Difficult to Fold Forward
Article No.
97-11-12
05/27/97
BENCH SEAT - SEAT BACK DIFFICULT TO FOLD
FORWARD - VEHICLES BUILT THROUGH 1/97
LIGHT TRUCK:
1996-97 RANGER
ISSUE:
Some customers may experience difficulties folding the full bench seat forward. This may be a result of the seat cushion being too thick, causing the
internal latch components to bind-up.
ACTION:
Replace the bench seat frame with a revised sized frame. The new seat frame will provide sufficient access/room so the internal components will not
bind-up. Refer to the following Service Procedure for details.
SERVICE PROCEDURE
