Ranger 2WD V6-245 4.0L VIN X SFI (1997)
Brake Pad: Testing and Inspection
^
Remove any dirt or debris on or around the brake shoe and lining (2001).
^
Inspect the brake shoe and lining for brake fluid, grease, oil or other contaminants.
^
Do not put contaminated brake shoe and lining into service. Do not attempt to remove any contaminant that has soaked into the lining material.
^
Inspect the brake shoe and lining pad material for minimum thickness.
^
Do not put brake shoes and linings into service that have lining thickness less than 1.5 mm (1/16 inch).
