Ranger 2WD V6-245 4.0L VIN X SFI (1997)
Vacuum Harness HVAC: Service and Repair
REMOVAL
1. Working in the engine compartment at the blower housing, disconnect the vacuum line (which is part of the A/C blower motor feed extension.
2. Disconnect the vacuum line from the vacuum source on the engine intake manifold, and remove it from the routing channel.
3. Disconnect the vacuum line from the A/C vacuum reservoir tank and bracket, and remove the rosebud from the heater plenum chamber case.
INSTALLATION
1. For installation, follow removal steps in reverse order.