Ranger 2WD V6-245 4.0L VIN X SFI (1997)
Fuel Gauge Module: Service and Repair
Typical Instrument Cluster
REMOVAL and INSTALLATION
1. Remove instrument cluster.
2. The instrument cluster gauge amplifier is a printed circuit board assembly located at the end on the rear of the instrument cluster. Carefully depress
the retaining clip with thumb on the component side of the board, and pull the board assembly out of the instrument cluster back plate.
3. To install instrument cluster gauge amplifier, insert into slots in the instrument cluster back plate and press home firmly with thumb on edge of the
board. An audible click will be heard as the retaining clip engages.
4. Install instrument cluster and check operation.
