Ranger 2WD V6-245 4.0L VIN X SFI (1997)
Cargo Lamp: Service and Repair
REMOVAL
1. Remove the two screws from the surface of the pillar/dome lamp lens.
2. After removing the screws, remove rear hi-mount lamp.
3. Remove the socket by rotating it 45 degrees and pulling it out of the rear hi-mount lamp that contains the burned-out miniature bulb and replace
the miniature bulb.
INSTALLATION
1. To install, push the bulb socket into the rear hi-mount lamp and rotate 45 degrees.
2. Position the rear hi-mount lamp on vehicle.
3. Secure with two screws.