Ranger 2WD V6-245 4.0L VIN X SFI (1997)
Hazard Warning Switch: Description and Operation
The multi-function switch is mounted to the LH side of the steering column and controls the following:
^
turn signal
^
windshield wiper/washer control
^
headlamp dimmer/flash-to-pass
^
Turn Signal
The hazard flasher system operates independently from the ignition switch. All turn signal lamps can be made to flash in unison by depressing and
releasing the hazard actuator located on the top part of the steering column. The switch is identified by a double triangle symbol.
The actuator will move out or away from the steering column tube to the ON position. The hazard flasher system is turned off by first pushing in the
actuator and then releasing the actuator. The actuator should remain in or toward the steering column in the OFF position.
NOTE: The turn signal system is deactivated when the hazard flasher system is on. Turn signal lever motion does not affect the hazard flasher system.
