Ranger 2WD V6-245 4.0L VIN X SFI (1997)
14. Install the solenoid clamp. Tighten the solenoid clamp screw to 6-8 Nm (53-71 inch lbs.).
CAUTION: The solenoid clamp must be installed in the TCC and EPC solenoid grooves, shift solenoid pockets and the No. 204 plug.
15. Install shift solenoids 1 and 3.
16. Install the solenoid clamp. Tighten the clamp screw to 6-8 Nm (53-71 inch lbs.).