Ranger 2WD V6-245 4.0L VIN X SFI (1997)
Seat Belt Warning Relay: Description and Operation
Safety Belt Warning Lamp
The continuous-loop system units incorporate a safety belt warning indicator switch, warning lamp and chime. The warning lamp and chime function as
reminders to fasten the safety belt. The following events will take place:
-
If safety belt is not buckled when the key is turned to the On position, the lamp comes on for 1 to 2 minutes and the chime sounds for 4 to 8
seconds.
-
If the safety belt is buckled while the lamp is On and the chime is sounding, both the lamp and chime turn Off.
-
If safety belt is buckled before the key is turned to the On position, both the lamp and chime will not turn On.
The safety belt warning indicator switch and safety belt warning chime are located below the instrument panel ash receptacle in the center of the
instrument panel finish panel.