Ranger 2WD V6-245 4.0L VIN X SFI (1997)
1. Use a 10 mm socket to remove the SS1 and SS3 solenoid clamp screws. Remove the solenoid clamp and the solenoids.
CAUTION: SS3 may pop out of its bore. This may damage the solenoid.
1. Use a 10 mm socket to remove the SS1 and SS3 solenoid clamp screws. Remove the solenoid clamp and the solenoids.
CAUTION: SS3 may pop out of its bore. This may damage the solenoid.