Ranger 2WD V6-245 4.0L VIN X SFI (1997)
2. Remove the coast clutch pack. Inspect for wear damage or overheating. Replace as necessary.
CAUTION:
^
Friction plates are directional. Note direction of grooves for installation.
^
If new clutch plates are being used, they should be soaked in clean transmission fluid for at least 30 minutes before assembly.
3. Compress the clutch piston springs with Clutch Spring Compressor T65L-77515-A. Remove the retaining ring.
WARNING: USE CAUTION WHEN RELEASING TOOL PRESSURE ON THE REAR CLUTCH PISTON SPRINGS.
CAUTION: Do not fully compress the clutch spring compressor or damage to the spring retainer may occur.
4. Remove the clutch piston spring retainer and 20 clutch piston springs.
