Ranger 2WD V6-245 4.0L VIN X SFI (1997)
18. Clean and inspect the EPC solenoid screens.
19. Remove and replace all shift solenoid O-rings.
20. Clean and inspect the torque converter clutch (TCC) solenoid.
Internal Harness Replacement
REMOVAL
NOTE: The main control assembly does not need to be removed.
1. Remove fluid, pan, gasket and filter. Discard filter.
2. Disconnect the solenoid connectors from the solenoids by carefully pulling downward and wiggling side to side.
NOTE: Only EPC and SS2 solenoid connectors need to be removed.
