Ranger 2WD V6-245 4.0L VIN X SFI (1997)
Differential Carrier: Service and Repair
DISASSEMBLY AND ASSEMBLY
The limited slip differential is removed and installed in the same manner as a conventional differential.
To disassemble and assemble the differential case, remove and install the ring gear and pinion and the differential bearing.
NOTE: Do not remove the differential bearings from the case journals unless the differential bearings are damaged. If the bearings remain on the case
during repair, keep them clean and free from foreign material.
To remove and install the differential clutch spring, differential pinion shaft, pinion gear and differential clutch pack. See: Adjustments
