Ranger 2WD V6-245 4.0L VIN X SFI (1997)
2. Install output shaft bearing by hand.
^
Dimension A: Height of bearing above mating surface of main drive gear bearing retainer.
^
Dimension B: Depth of bearing retainer bore (input shaft).
^
Dimension C: Depth of countershaft front bearing race (transmission case-to-retainer mating surface).
^
Dimension D: Depth of main drive gear bearing retainer bore (countershaft).
^
Shim computation equations are as follows:
Dimension B - [Dimension A + shim thickness] = 0.05 to 0.15 mm (0.002-0.006 inch)
Dimension C + [Dimension D - shim thickness] = 0.15 to 0.25 mm (0.006-0.010 inch)
