Ranger 2WD V6-245 4.0L VIN X SFI (1997)
Power Window Switch: Service and Repair
NOTE: The window regulator control switches are located on the front door trim panel.
REMOVAL
1. Using a thin-bladed tool, carefully pry up the rear of the window regulator switch housing and rotate the window regulator switch housing up and
out of the armrest.
2. Remove the connector attaching screws from window regulator switch housing.
3. Carefully pry the window regulator control switches from the connector contact pins with a small screwdriver.
NOTE: The window regulator control switches are keyed to the connector and can only be installed one way.
INSTALLATION
For installation, follow removal procedures in reverse order.