Ranger 2WD V6-3.0L (2008)
2. Remove the door pull handle.
-
Lift the door pull handle upward to release the door pull handle retaining clips.
-
If equipped, disconnect the electrical connectors.
-
Remove the wire harness pin-type retainer.
Low series
3. Remove the door pull handle screw.
4. Remove the window regulator handle.
All vehicles
5. Remove the front door trim finish panel.
-
Pull the front door trim finish panel outward to release the front door trim finish panel retaining clips.
High series
6. Remove the door pull handle bracket.
-
Remove the 2 door pull handle bracket screws.
7. Remove the 2 front door trim panel screws.
Low series
8. Remove the front door trim panel screw.
All vehicles
9. CAUTION: Do not pull directly outward on front door trim panel, as damage will occur.
Remove the front door trim panel.
-
Lift upward to remove the front door trim panel.