Ranger 2WD V6-3.0L (2008)
2. Remove the bolt and safety belt guide.
-
Use the Safety Belt Bolt Bit to remove the bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
-
Remove the safety belt guide.
3. Remove the safety belt anchor.
-
Use the Safety Belt Bolt Bit to remove the bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
4. Remove the door trim panel.
-
Separate the trim panel from the door.
5. To install, reverse the removal procedure.