Ranger 2WD V6-3.0L (2008)
Floor Console With Speaker Enclosure
Removal and Installation
Vehicles with a speaker enclosure
1. Remove the floor console storage tray mat and screw.
2. Remove the floor console front cup holder mat and screw.
3. Remove the LH and RH floor console push-pin retainers.
4. Remove the floor console front section.
All vehicles
5. Move the front seats to the full forward position.
6. Remove the floor console armrest.
-
Remove the LH and RH floor console armrest bolt covers.
-
Remove the LH and RH floor console armrest bolts.
-
To install, tighten to 5 Nm (44 lb-in).
7. Remove the floor console rear screw.
8. Move the front seats to the full rearward position.
