Ranger 2WD V6-3.0L (2008)
8. Install the outboard seat backrest latch release cable end and swivel and install the cable anchor.
9. Position the side shield and install the 2 clips (1 shown).
10. Install the 2 side shield screws.
11. Install the backrest recliner handle and screw.
12. Install the 60 percent bench armrest.
13. Install the 60 percent bench seat.
Seat Backrest - Front, Bucket and 40 Percent
SEAT BACKREST - FRONT, BUCKET AND 40 PERCENT
Exploded View
