Ranger 2WD V6-3.0L (2008)
NOTE:
-
The air bag warning indicator illuminates when the restraints control module (RCM) fuse is removed and the ignition switch is ON. This is normal
operation and does not indicate a supplemental restraint system (SRS) fault.
-
The SRS must be fully operational and free of faults before releasing the vehicle to the customer.
1. Remove the affected seat.
2. Remove the 60 percent armrest.
3. Remove the 60 percent seat backrest assembly.
4. Release the backrest J-clip.
5. CAUTION: Use care when separating the seat back trim cover from the hook-and-loop strips or the hook-and-loop strips may be torn
from the seat back foam.
Invert the backrest trim cover and release the hook-and-loop strips.
6. Remove all the hog rings and remove the backrest trim cover from the backrest foam pad.
7. Lift the lower end of the backrest foam pad off the backrest frame.