Ranger 2WD V6-3.0L (2008)
2. CAUTION: Use of a brake drum puller or a torch is not recommended. Brake drum distortion may result.
NOTE: If the brake drum is rusted to the axle shaft pilot diameter, tap the center of the brake drum between the wheel studs.
Remove the brake drum.
3. Using the Brake Drum Micrometer, measure the brake drum inside diameter.
^
Install a new brake drum if the maximum inside diameter exceeds the specification molded on the brake drum.
4. To install, reverse the removal procedure.
^
Adjust the rear brakes.
