Ranger 2WD V6-3.0L (2008)
Install and remove the crankshaft main bearing cap.
4. Verify the crankshaft journal clearance.
Crankshaft End Play
NOTE: Refer to Specifications.
1. Using the Dial Indicator Gauge, measure the crankshaft end play.
2. Position the crankshaft to the rear of the cylinder block.
3. Zero the indicator.
4. Move the crankshaft to the front of the cylinder block. Note and record the crankshaft end play.
Crankshaft Runout
NOTE: Refer to Specifications.