Ranger 2WD V6-3.0L (2008)
Front Axle Assembly (Four Wheel Drive [4WD] Vehicles) (Part 2)
LH Engine Support Insulator
Removal
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Disconnect the battery ground cable.
3. Remove the hood.
4. Remove the fan.
5. Attach the Lifting Eyes.
6. Remove the engine support insulator nuts.
7. Raise the engine and support it with a Three-Bar Engine Support.
Rear wheel drive (RWD) vehicles