Ranger 2WD V6-3.0L (2008)
3. Install the RH front halfshaft.
RWD vehicles
4. Install the engine support insulator nut.
^
Tighten to 103 Nm (76 lb-ft).
5. Install the right front spring.
All vehicles
6. Lower the engine and remove the Three-Bar Engine Support Kit.
7. Install the engine support insulator nuts.
^
Tighten to 109 Nm (80 lb-ft).
8. Remove the Lifting Eyes.
9. Install the fan blade.
10. Install the hood.