Ranger 2WD V6-3.0L (2008)
Air Door Actuator / Motor: Service and Repair
Vacuum Control Motor - Panel Defrost Door
VACUUM CONTROL MOTOR - PANEL DEFROST DOOR
Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the lower steering column cover.
1
Remove the screws and detach the hood release handle.
2
Remove the 2 screws.
3
Remove the lower steering column cover.
3. Remove the bolts and the lower steering column cover reinforcement.
4. Remove the 2 screws and detach the relay panel.
5. Remove the screws and disconnect the vacuum connector.