Ranger 2WD V6-3.0L (2008)
Removal
All vehicles
1. Remove the A/C compressor.
Vehicles with leaf spring A/C clutch
2. Remove the A/C clutch disc and hub retaining bolt.
1
Hold the A/C clutch disc and hub with the special tool.
2
Remove the bolt.
3. Remove the A/C clutch disc and hub and the A/C clutch hub spacer.
1
Thread an 8 x 1.25 mm bolt into the A/C clutch disc and hub to force it from the compressor shaft.
2
Lift the A/C clutch disc and hub and the spacer from the compressor shaft.
Vehicles with 3-eye A/C clutch