Ranger 2WD V6-3.0L (2008)
4. Remove the A/C clutch disc and hub retaining bolt.
1
Hold the A/C clutch disc and hub with the special tool.
2
Remove the bolt.
5. Remove the A/C clutch disc and hub and the A/C clutch hub spacer.
1
Thread an 8 x 1.25 mm bolt into the A/C clutch disc and hub to force it from the compressor shaft.
2
Lift the A/C clutch disc and hub and the A/C clutch hub spacer from the compressor shaft.
All vehicles
6. Remove the A/C clutch pulley snap ring.
7. Remove the A/C clutch pulley.
1
Install the special tool.
2
Remove the A/C clutch pulley.
8. CAUTION: Do not use air tools. The A/C compressor clutch field coil can be easily damaged.
