Ranger 2WD V6-3.0L (2008)
5. If the evaporator core orifice is broken, screw the end of the special tool into the broken orifice. Hold the T-handle stationary while rotating the
tool body to remove the evaporator core orifice.
Installation
1. Lubricate the evaporator core orifice O-ring seals with clean PAG oil and install the evaporator core orifice using the special tool.
2. Install new O-ring seals and connect the evaporator inlet fitting.
3. Evacuate, leak test and charge the refrigerant system.