Ranger 2WD V6-3.0L (2008)
1. Disconnect the battery ground cable.
2. Slide the evaporative emission (EVAP) canister purge valve off the bracket.
3. Disconnect the intake manifold vapor tube-to-EVAP canister purge valve quick connect coupling, fuel tank vapor tube-to-EVAP canister purge
valve quick connect coupling and the EVAP canister purge valve electrical connector.
4. Remove the valve.
5. To install, reverse the removal procedure.
-
Carry out the leak test. See: Testing and Inspection
-
Carry out the evaporative emission repair verification drive cycle.
