Ranger 2WD V6-3.0L (2008)
1. Release the fuel system pressure.
2. If equipped, remove the fuel tube safety clip from the male hose.
3. Install the special tool and push into the spring lock coupling.
4. Separate the spring lock coupling.
Connect - Type II
1. Inspect and clean both spring lock coupling ends.
2. NOTE:
-
Make sure the fuel tube clicks into place when installing the tube. To make sure that the fuel tube is fully seated, pull on the tube.
-
Lubricate the tube end with clean engine oil to ease assembly.
Align and push the fuel tube spring lock coupling until a click is heard.
3. Pull on the spring lock coupling to make sure it is fully seated. If equipped, install the fuel tube safety clip on the male end.
