Ranger 2WD V6-3.0L (2008)
4. NOTE:
-
2.3L shown, 3.0L and 4.0L similar.
-
Open the drain valve slowly to relieve the fuel system pressure. This may drain fuel from the system. Place fuel in a suitable container.
Upon completion of the fuel system pressure test, open the drain valve on the special tool and relieve the fuel system pressure.
5. NOTE: It may take more than one key cycle to pressurize the fuel system.
Cycle the ignition key and wait 3 seconds to pressurize the fuel system. Check for leaks before starting the engine.