Ranger 2WD V6-3.0L (2008)
Cruise Control Switch: Service and Repair
SPEED CONTROL SWITCH
Removal and Installation
1. Remove the steering wheel.
2. Remove the steering wheel rear cover.
1
Remove the 2 screws.
2
Remove the steering wheel rear cover.
3. Remove the ribbon harness from the clips.
4. Disconnect the horn contact electrical connectors.
5. Remove the right side horn contact.
1
Remove the 2 screws.
-
To install, tighten to 7 Nm (62 lb-in).
2
Remove the horn contact.