Ranger 2WD V6-3.0L (2008)
14. Remove the nut and position the battery cable starter solenoid wire terminal aside.
-
To install, tighten to 5 Nm (44 lb-in).
15. Release the battery cable locator from the generator bracket.
16. Disconnect the 2 generator electrical connectors.
17. Position the generator B+ protective cover aside, remove the nut and position the battery cable generator B+ terminal aside.
-
To install, tighten to 8 Nm (71 lb-in).
18. Remove the battery cable.
19. To install, reverse the removal procedure.