Ranger 2WD V6-3.0L (2008)
Power Steering Fluid Cooler: Service and Repair
Power Steering Fluid Cooler
Removal and Installation
CAUTION: While repairing the power steering system, care should be taken to prevent the entry of foreign material or failure of the power
steering components may result.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the 2 power steering fluid cooler nuts.
^
To install, tighten to 40 Nm (30 lb-ft).
3. Compress the clamps and disconnect the 2 power steering fluid cooler hoses.
4. To install, reverse the removal procedure.
^
Fill the power steering system.
