Ranger 2WD V6-3.0L (2008)
^
Tighten to 133 Nm (98 lb-ft).
3. CAUTION: Install the new cotter pin into the lower ball joint from outboard to inboard with the fingers bent together at a right angle.
Failure to do so will result in damage to the wheel and tire assembly.
Install a new lower ball joint cotter pin.
4. Install the 2 shock absorber lower nuts.
^
Tighten to 25 Nm (18 lb-ft).
5. Install the stabilizer link stud and grommet and the stabilizer link assembly.
^
Tighten the stabilizer link nut to 35 Nm (26 lb-ft).
6. Install the wheel and tire.
7. With the weight of the vehicle on the wheel and tire, tighten the 2 lower arm nuts to 200 Nm (148 lb-ft).
