Ranger 2WD V6-3.0L (2008)
6. Remove and discard the spring-to-frame bracket bolt and flagnut.
^
To install, tighten to 200 Nm (148 lb-ft).
7. Remove and discard the spring shackle-to-spring bolt and nut and remove the spring.
^
To install, tighten to 103 Nm (76 lb-ft).
8. If necessary, remove the spring shackle.
^
Remove and discard the spring shackle-to-frame bracket bolt and flagnut.
^
Remove the shackle.
^
To install, tighten to 115 Nm (85 lb-ft).
9. To install, reverse the removal procedure.
