ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Transmission Fluid Cooler Backflushing and Cleaning|Page 3373 > < Transmission Fluid Cooler Backflushing and Cleaning|Page 3371
Page 1
background image

Fluid - A/T: Service and Repair
Transmission Fluid Drain and Refill - Vehicles Not Equipped With Torque Converter Drain Plug

Transmission Fluid Drain and Refill - Vehicles Not Equipped With Torque Converter Drain Plug

Drain

CAUTION:  Use only clean automatic transmission fluid. Do not use any supplemental transmission fluid additives, treatments or cleaning
agents. The use of these materials may affect the operation of the transmission, resulting in internal component failure.

1. With the vehicle in PARK, position it on a hoist.

2. NOTE:  If equipped, the transmission servo heat shield must be unclipped from the fluid pan rail and positioned aside for fluid pan removal.

If equipped, loosen the nut and position the heat shield aside.

3. Place a drain pan under the transmission fluid pan.
4. Drain transmission fluid.

^

Remove all the transmission fluid pan screws except for 2 in the front. Loosen the 2 front transmission fluid pan screws. Pry the rear of the
transmission fluid pan down and allow fluid to drain. After fluid is drained, remove the front 2 transmission fluid pan screws.

5. NOTE:  The transmission fluid pan gasket is reusable. Clean and inspect for damage, if not damaged, the gasket should be reused.

Remove the transmission fluid pan.
1

Remove the transmission fluid pan.

2

Remove the transmission fluid pan gasket.

Transmission Fluid Cooler Backflushing and Cleaning|Page 3373 > < Transmission Fluid Cooler Backflushing and Cleaning|Page 3371