Ranger 2WD V6-3.0L (2008)
5. Remove and discard the transmission fluid filter.
1
Remove the transmission fluid filter screw.
2
Remove the transmission fluid filter.
6. Unclip main control valve body wire harness.
^
Lift up on wire harness guide and protector and disengage the retaining pins from the solenoid clamps.
7. Disconnect the 6 solenoid electrical connectors.
1
Disconnect the SSA, SSB, SSC and SSD electrical connectors.
2
Disconnect the torque converter clutch (TCC) solenoid electrical connector.
3
Disconnect the electronic pressure control (EPC) solenoid electrical connector.