Ranger 2WD V6-3.0L (2008)
2. Tighten the special tool to seat the drive pinion bearing cups into their bores.
3. NOTE: If a feeler gauge can be inserted between a drive pinion bearing cup and the bottom of its bore at any point around the drive pinion
bearing cup, the drive pinion bearing cup is not correctly seated.
Make sure the drive pinion bearing cups are correctly seated in their bores.
4. NOTE: Install new drive pinion bearings without any additional lubricant since the anti-rust oil provides adequate lubricant without upsetting the
drive pinion bearing preload settings.
Assemble and position the special tools.