Ranger 2WD V6-3.0L (2008)
5. NOTE: This step duplicates final drive pinion bearing preload.
Tighten the special tool.
^
Tighten to 2.2 Nm (20 lb-inch) rotational torque.
6. NOTE: The special tool must be offset to obtain an accurate reading.
5. NOTE: This step duplicates final drive pinion bearing preload.
Tighten the special tool.
^
Tighten to 2.2 Nm (20 lb-inch) rotational torque.
6. NOTE: The special tool must be offset to obtain an accurate reading.