Ranger 2WD V6-3.0L (2008)
Removal
CAUTION: The color on the rear face of the drive pinion nut is critical to this repair. Use the same color new drive pinion nut for
installation. If a new collapsible spacer is installed, install the nut in the kit or damage to the component may occur.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. NOTE: The rear wheels and brake drums must be removed to prevent brake drag during drive pinion bearing preload adjustment.
Remove the rear wheel and tire.
3. Remove the rear brake drums.
4. NOTE: Index-mark the driveshaft flange and pinion flange for correct alignment during installation.
Remove the 4 driveshaft-to-pinion flange bolts.
5. CAUTION: The driveshaft flange fits tightly on the rear axle pinion flange pilot. Never hammer on the driveshaft or any of its
