Ranger 2WD V6-3.0L (2008)
Drive/Propeller Shaft: Service and Repair
Driveshaft - Rear Wheel Drive (RWD)
Driveshaft - Rear Wheel Drive (RWD)
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Index-mark the driveshaft flange to the rear axle pinion flange to maintain driveshaft balance.
3. NOTE: Make sure the index marks on the extension housing and the driveshaft are aligned before separation.
NOTE: After removing the driveshaft, place an index mark on the transmission output shaft that matches the transmission extension housing
mark.
Index-mark the driveshaft and the extension housing.