Ranger 2WD V6-3.0L (2008)
Axle Shaft Assembly: Service and Repair
Ford 8.8-Inch Ring Gear High Torque - Rear Drive Axle/Differential
Axle Shaft
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the wheel and tire.
3. Remove the 10 differential housing cover bolts and drain the lubricant from the rear axle housing.
4. Remove the rear brake drums.
5. Remove the differential thrust plate.
1
Remove and discard the differential thrust plate lock bolt.
2
Remove the differential thrust plate.
6. NOTE: Do not damage the rubber O-rings in the axle shaft grooves.
Push the axle shafts inboard and remove the U-washers.
