Ranger 2WD V6-3.0L (2008)
Flywheel: Service and Repair
Flywheel
Flexplate or Flywheel and Crankshaft Rear Seal - Exploded View
Flexplate or Flywheel and Crankshaft Rear Seal - Exploded View
Removal
1. Remove the clutch.
2. Remove the flywheel bolts.
3. Remove the flywheel.
Installation
1. Install the flywheel.
^
Install the 6 bolts. Tighten the bolts in a criss-cross pattern.
^
Tighten to 80 Nm (59 lb-ft).
2. Install the clutch.