Ranger 2WD V6-3.0L (2008)
Windshield Washer Pump: Service and Repair
WASHER PUMP AND RESERVOIR
Exploded View
Washer Pump And Reservoir - 3.0L, (2V) And 4.0L SOHC
Removal and Installation
WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical advice.
Consult the product Material Safety Data Sheet (MSDS) if available. Failure to follow these instructions may result in serious personal injury.
NOTE: To prevent spilling windshield washer fluid, drain the windshield washer reservoir before removal.
1. Disconnect the overflow hoses from the engine coolant overflow reservoir and plug the outlet ports of the reservoir.
2. Disconnect the windshield washer reservoir pump electrical connector.
