Ranger 2WD V6-3.0L VIN U (1998)
Removal and Installation
REMOVAL
WARNING: BRAKE FLUID CONTAINS POLYGLYCOL ETHERS AND POLYGLYCOLS. AVOID CONTACT WITH EYES. WASH
HANDS THOROUGHLY AFTER HANDLING. IF BRAKE FLUID CONTACTS EYES, FLUSH EYES WITH RUNNING WATER FOR 15
MINUTES. GET MEDICAL ATTENTION IF IRRITATION PERSISTS. IF TAKEN INTERNALLY, DRINK WATER AND INDUCE
VOMITING. GET MEDICAL ATTENTION IMMEDIATELY.
1. Disconnect the brake fluid level warning switch.
2. On cruise control equipped vehicles, disconnect the brake pressure switch.
3. Disconnect the two brake lines, and plug the lines and the brake master cylinder ports.
4. Remove wiring retainer clip from the master cylinder.