Ranger 2WD V6-3.0L VIN V Flex Fuel (2001)
Rear Door Exterior Handle: Service and Repair
Heavy Duty Riveter
SPECIAL TOOL(S)
REMOVAL
1. Remove the exterior door handle.
1
Remove the steel centers from the rivets.
2
Remove out the rivets.
3
Remove the exterior handle.
NOTE: Use a drift punch to remove the steel centers and a 6.35 mm (1/4 in) diameter drill bit to remove the rivets.
2. Disconnect the cable conduit from the exterior handle.
1
Disconnect the locking clips.
2
Disconnect the cable conduit.