Ranger 2WD V6-3.0L VIN V Flex Fuel (2001)
Technical Service Bulletin # 01-11-3
Date: 010611
Quarter Trim Panel - Poor Fit/No Mounting Holes
Article No.
01-11-3
06/11/01
TRIM - INTERIOR REAR CORNER TRIM - MOUNTING
HOLES DO NOT LINE UP CORRECTLY - POOR FIT -
VEHICLES BUILT THROUGH 10/9/2000
FORD:
1995-2001 RANGER
ISSUE
When replacing interior rear corner trim (left and/or right) the mounting holes within the sheet metal and center trim panel do not line up correctly. This
may be caused by missing attachment holes in the sheet metal.
ACTION
Obtain new quarter trim panel(s) (left or right) and fasten to back of cab by creating new mounting point(s). Refer to the following Service Procedure for
details.
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage.
