Ranger 2WD V6-3.0L VIN V Flex Fuel (2001)
Parking Brake Cable: Service and Repair
Cable and Conduit - Front
Cable and Conduit - Front
Removal
1. Remove the parking brake control.
2. Disconnect the front parking brake cable from the parking brake control.
3. Remove the front parking brake cable and conduit housing.
1
Compress the front parking brake cable and conduit-to-parking brake control clip.
2
Remove the front parking brake cable and conduit housing.
Installation
1. Follow the removal procedure in reverse order.
^
Make sure cable is routed through loop on take-up spool.