Ranger 2WD V6-3.0L VIN V Flex Fuel (2001)
Crankshaft Main Bearing Seal: Service and Repair
Crankshaft Rear Oil Seal
Special Tool(s)
Removal
1. Remove the flywheel.
2. Remove the crankshaft rear oil seal using the Rear Crankshaft Seal Remover.
Installation
1. Lubricate the outer lips and the inner seal on the crankshaft rear oil seal with clean engine oil.
2. Install the crankshaft rear oil seal using a Rear Crankshaft Seal Replacer.
3. Install the flywheel.
